REQUEST A QUOTE Contact Us Site Map Home

1-800-JET-EDGE (538-3343)

Print Page

Waterjet Machining Products

Waterjet Intensifier Pumps

View All: Waterjet Intensifier Pumps

iP60-100 Waterjet Intensifier Pump - Dual Intensifiers

The iP60-100 waterjet intensifier pump is a 100hp waterjet pump rated for 60,000 psi (4,100 bar). It features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Matched-metal components prevent galling of hydraulic system components.

Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump. Hydraulic fluid also is cooled and filtered. Jet Edge waterjet pumps feature a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings; free-floating self-aligning plungers increase seal life. Jet Edge's hydraulic systems have a 4,000-hour warranty.  Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of ultra-high pressure water to the cutting tool, ensuring optimal cut quality.

< Printer-friendly specifications

If you are interested in this product, you also may be interested in our other waterjet products:

< Water Jet Intensifier Pumps 

< Jet Edge Water Jet Pump Specifications 

< Water Jet Tables

< Water Jet Accessory Parts

Request Information About Jet Edge Water Jets

How Waterjets Work - Waterjet 101

Construction

< Printer-friendly Specifications (.pdf)

  • Heavy gauge sheet metal covers
  • Rugged all-steel welded framework
  • Hinged cover and removable access panels for convenient machine inspection and maintenance
  • Integral hydraulic reservoir
  • Optional Sound Insulation Package
  • NEMA 12/13 rated electrical enclosure

Standard Features

Standard Features

  • High efficiency TEFC motor
  • 1,500 or 1,800 nominal motor speed (rpm)
  • Wye-Delta soft start with disconnect
  • Programmable Logic Controller (PLC) for operation and diagnostics
  • Electronically shifted intensifiers
  • Safety shutdown systems
  • Automatic safety pressure bleed-down valve
  • Axial piston, variable displacement, pressure-compensated hydraulic pump
  • Thermostatically controlled cooling system
  • In-line UHP Water Filter to 5 Micron
  • UHP safety shielded tubing
  • Liquid-filled pressure gauges

Physical Size0.5 gallon (1.9 liter) high pressure attenuator

  • Length: 86 in (218 cm)
  • Width: 40 in (102 cm)
  • Height: 55 in (140 cm)
  • Approximate Weight with Fluid: 4,600 lbs. (2087 kg)

Electric Motor

  • Motor Output: 100 hp (75 kw)
  • Motor Type: High Efficiency TEFC electric motor
  • Full load amps @ 460vac: (60Hz) 119
  • Full load amps @ 230vac: (60Hz) 238
  • Full load amps @ 380vac (50Hz) 147

Intensifier

  • Type: Single piston, dual plunger, reciprocating
  • Number of Intensifiers: two
  • Rated Pressure: 60,000 psi (4,100 bar)
  • Intensification Ratio: 20:1
  • Flow Rate: 2.0 gpm (7.6 lpm)
  • Maximum Rated Orifice Size: .021 in (0.53 mm)

Low-Pressure Water/Intensification Water

  • Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM
  • Supply Requirements: 4.0 gpm @ 20 psi (1.4 bar ) min. / 75°F (24°C) max
  • Filtration: 10, 1, .45 Micron

Coolant Water

  • Maximum Temperature: 70°F (21°C)
  • Minimum: 10.0 gpm (0-37.9 lpm) @ Minimum 30 psi (2.1 bar)
  • Ability to Remove: 97,000 BTU's/hour(19:1 at 50Hz)
  • Heat Exchanger: Braised Plate

Hydraulics

  • Reservoir Capacity: 60 gallons (230 liters)
  • Filtration: 10 Micron
  • Bladder type accumulators

Environmental

  • Ambient Room Temperature: 50°-100°F (10°-37°C)
  • Relative Humidity: Noncondensing, Maximum 95% @ 100°F

Specifications subject to change.

Product Specifications